htaccess Tutorial

In this forum you can read tutorials. You can also post your own tutorials to help other members.
Post Reply
Site Admin
Posts: 2
Joined: Fri Nov 02, 2018 11:07 pm

htaccess Tutorial

Post by admin » Sun Nov 04, 2018 5:51 pm

In this tutorial you will find out about the .htaccess file and the power it has to improve your website. Clear Water Host supports .htaccess files however as a customer you are responsible for what is in this file and how it changes your site.

Creating a .htaccess File

You can create a .htaccess file on your local computer or on the server.
On your computer:
Windows: Using Notepad save the file as .htaccess

Mac OS X: Using TextEdit save the file as ".htaccess"
Note: If you save the file as .htaccess it will be hidden and you will not be able to see it in the Finder.

Using your preferred FTP client upload the file to the server. The .htaccess file will need to be in the folder where your site is located, typically the public_html folder.
On the server

Login to your cPanel Account
Click the File Manager icon, located in the Files section.
From the File Manger popup choose "Choose Hidden Files (dotfiles)."
Note: If you do not see this popup you will need to click the "reset all interface settings" link at the bottom of the cPanel page.
From the File Manager popup choose the folder you would like to open, most often the "Web Root (public_html/www)"
Click the Go button.
Note: If you are in the File Manager already you can add &showhidden=1 to the end of the URL.
Click the New File icon to create a new file and name it .htaccess

Alternative Index Files

You may not always want to use index.htm or index.html as your index file for a directory, for example if you are using PHP files in your site, you may want index.php to be the index file for a directory. You are not limited to 'index' files though. Using .htaccess you can set foofoo.blah to be your index file if you want to!

Alternate index files are entered in a list. The server will work from left to right, checking to see if each file exists, if none of them exist it will display a directory listing (unless, of course, you have turned this off).

Code: Select all

DirectoryIndex index.php index.php3 index.html index.htm
Custom Error Pages

You can customize your own, personal error pages (for example when a file is not found) instead of using Clear Water Host error pages or not having an error page. This will make your site seem much more professional.

You can use custom error pages for any error as long as you know its number (like 404 for page not found) by adding the following to your .htaccess file:

Code: Select all

ErrorDocument errornumber /file.html
For example if I had the file notfound.html in the root directory of my site and I wanted to use it for a 404 error I would use:

Code: Select all

ErrorDocument 404 /notfound.html
If the error page is not in the root directory of your site, you can enter the path to the file:

Code: Select all

ErrorDocument 500 /errorpages/500.html
These are some of the most common errors:

401 - Authorization Required
400 - Bad request
403 - Forbidden
500 - Internal Server Error
404 - Wrong page

Stop a Directory Index From Being Shown

Sometimes, for one reason or another, you will have no index file in your directory. This will, of course, mean that if someone types the directory name into their browser, a full listing of all the files in that directory will be shown. This could be a security risk for your site.

To prevent against this (without creating lots of new 'index' files, you can enter a command into your .htaccess file to stop the directory list from being shown:

Code: Select all

# disable directory browsing
        Options ExecCGI Includes IncludesNOEXEC SymLinksIfOwnerMatch -Indexes
        # enable directory browsing
        Options All +Indexes
Deny/Allow Certain IP Addresses

To only allow people with specific IP addresses to access your site (for example, only allowing people using a particular network to get into a certain directory) or you may want to ban certain IP addresses (for example, keeping disruptive members out of your message boards).This will only work if you know the IP addresses you would like to ban.

Please keep in mind that most ISP's use dynamic IP addresses, so this is not always the best way to limit/grant access.
Block an IP Address

Code: Select all

#Deny List
        order allow,deny
        deny from #specify a specific address
        deny from #specify a subnet range
        deny from 123.123.* #specify an IP address wildcard
        allow from all
Allow only Certain IP Addresses

Code: Select all

#Allow List
        order deny,allow
        allow from #specify a specific address
        allow from #specify a subnet range
        allow from 123.123.* #specify an IP address wildcard
        deny from all
Note: This will still allow scripts to use the files in the directory.


Redirect from a specific file to a new file


Code: Select all

Redirect /redirect_from.html
In the above example, a file in the root directory called redirect_example.html is redirected to the URL
If the old file were in a subdirectory then you could use:


WildCard Redirect / Redirecting from one folder to a new folder

Code: Select all

Redirect /redirect_from
Now any request to your site below /olddirectory will be redirected to the new site, with the extra information in the URL added on, for example if someone typed in:

They would be redirected to:

Redirecting (URL Rewriting) with Joomla

To enable URL Rewriting in Joomla you will need to copy and paste the following code into your .htaccess file.

# For security reasons, Option followsymlinks cannot be overridden.
#Options +FollowSymLinks
Options +SymLinksIfOwnerMatch

The .htaccess File

Adding password protection to a directory using .htaccess takes two stages. The first part is to add the appropriate lines to your .htaccess file in the directory you would like to protect. Everything below this directory will be password protected:

Code: Select all

AuthName "Section Name"
        AuthType Basic
        AuthUserFile /home/username/.htpasswds
        Require valid-user 
There are a few parts of this which you will need to change for your site. You should replace "Section Name" with the name of the part of the site you are protecting e.g. "Members Area".

The /home/username/.htpasswds should be changed to reflect the full server path to the .htpasswds file (more on this later). If you do not know what the full path to your webspace is, check your Just Host cPanel. Look on the left "stats" column of the cPanel.
The .htpasswds File

Password protecting a directory takes a little more work than any of the other .htaccess functions because you must also create a file to contain the usernames and passwords which are allowed to access the site. These should be placed in a file which (by default) should be called .htpasswd. This can be placed anywhere within you website (as the passwords are encrypted) but it is advisable to store it outside the web root (in your home directory) so that it is impossible to access it from the web.
Entering Usernames And Passwords

Once you have created your .htpasswd file (you can do this in a standard text editor) you must enter the usernames and passwords to access the site. They should be entered as follows:

Code: Select all

Where the password is the encrypted format of the password. There is a good username/password service at the KxS site which will allow you to enter the username and password and will output it in the correct format.

For multiple users, just add extra lines to your .htpasswd file in the same format as the first.
Accessing The Site

When you try to access a site which has been protected by .htaccess your browser will pop up a standard username/password dialog box. Alternatively you can send the username and password (unencrypted) in the URL as follows:

Post Reply